CPVC Injection Molding
GENERAL:
Chlorinated Poly (Vinyl Chloride) (CPVC) is a
thermoplastic pipe and fitting material made
with CPVC compounds meeting the requirements
of ASTM Class 23447 as defined in ASTM
Specification D1784.CPVC
applications are for
potable water distribution, corrosive fluid
handling in industry, and fire suppression
systems.
CPVC piping systems are:
- Environmentally
friendly.
- Provide
long service life.
- Easy
to install and handle.
- Corrosion
resistant.
- Cost
effective.
- Widely
accepted by codes.
Industrial
CPVC pipe is manufactured by extrusion in
sizes from ¼" to 12" diameter to
Sch 40, Sch 80, and SDR (Standard Dimension
Ratio) dimensions.
CPVC
pipe for plumbing systems is manufactured by
extrusion in sizes ¼" through 2"
copper tube size (CTS) dimensions. The CTS
plumbing products are made to copper tube
outside diameter dimensions, in accordance
with ASTM D-2846 specifications, and have an
SDR 11 wall thickness. The pressure ratings
of the CTS SDR 11 systems are 400 psi (pounds
per square inch) at 73 F and 100 psi at 180
F. CPVC plumbing pipe is sold in both
straight lengths and (in small diameters)
coils.
USES/APPLICATIONS:
CPVC piping which is suitable for hot and
cold water distribution has a 400 psi
pressure rating at room temperature, and a
100 psi pressure rating at 180 F. CPVC
materials are resistant to many everyday
household chemicals.
Since
CPVC materials do not support combustion,
they cannot burn without an external fuel
source. This property makes CPVC pipe an
attractive alternative to steel and copper
pipe for fire sprinkler applications. CPVC
fire sprinkler piping systems are approved
for light hazard applications and for use in
single and multifamily dwellings.
Installation shall be in accordance with the
NFPA Section 13, 13D, and 13R.
Let
Saras Associates
handle all your CPVC and
Plastic Molding requirements.
Put us to
"WORK" for you.
Contact
Saras Associates